Shandong Jingheng Yuxin medical equipment Co., Ltd.

News Center

Sterilizer is a very common sterilization equipment

Published Date:05-01-2021    Source£º    Author£º  Viewed£º397

At this time, it should be noted that the temperature should not be too high or lower than the specified value. It is generally between 120-122 degrees and kept warm for half an hour. In the process of heat preservation, due to the high temperature, you should wear gloves during operation, and you should not stay away. You must stare at the pointer parameters and time. During the heat preservation process, the constant temperature can be maintained by adjusting the heating switch and adjusting the exhaust. Do not adjust too quickly, and fine tune it.

Cooling: when the holding time is up, it starts to cool down. Generally, it is OK to turn off the heating switch directly. You must wait until the temperature drops down, that is, it falls below 40 degrees. If you are in a hurry, you can use the method of rapid cooling, that is, slightly open the exhaust hole, and then apply a wet towel on the cover.


Previous£º No message!