CST series pure steam pulsevacuum sterilizer

Product Center

Location:Home Product Center CST series pure steam pulsevacuum sterilizer

CST series pure steam pulsevacuum sterilizer

Hits：1447

Published Date:11-09-2021

Summary：

Pure steam pulse vacuum sterilizer CST series pulse vacuum sterilizer uses saturated steam as sterilizing medium, th......

Previous： No message!

Next： No message!

Product Introduction:

Pure steam pulse vacuum sterilizer

CST series pulse vacuum sterilizer uses saturated steam as sterilizing medium, through pulsevacuum, the saturated steam can penetrate to the surface of the articles completely, and the high temperature saturated steam under high pressure can kill all microorganisms and their buds, the sterilizing effect is reliable, it is the most effective method in physical sterilization method.Can be widely used in pharmaceutical, biological engineering, scientific research and other fields of fabric, instruments, lumen instruments, rubber, liquid sterilization treatment.

Main performance features

◆ Motorized door, (removable) tooth meshing seal structure, motor chain drive door up and down.

◆ Double door channel type, with pressure safety interlock, liquid program with temperature door safety interlock, double door interlock.
◆ Inflatable pressure driven sealing ring to achieve automatic sealing, the new high quality high tear resistance silicone rubber material circular hollow door sealing ring, the surface of special coating treatment, wear-resistant smooth, with better sealing effect and longer service life, life up to 1500 cycles.
◆ Main structure is rectangular section, European ring reinforcement jacket without flange structure, sealing groove is directly welded on both ends of the ring jacket.
◆ Control system: Siemens programmable controller PLC and color touch screen, the whole process automatic program control, automatic display of running process state, running curve and temperature, pressure, time and other parameters.

◆ Intelligent maintenance system :(optional) equipped with a remote monitoring and maintenance module, you can remotely monitor the device running on a PC or mobile phone and upgrade software.
◆ Has sterilization procedures for fabric, instrument, cavity instrument, rubber, liquid, custom and BD test, vacuum leakage test and other test procedures.
◆ Pulsation mode: adopt negative pressure pulsation, cross pressure pulsation and positive pressure pulsation modes, the air removal capacity is greater than 99.99%, save steam consumption, improve steam sterilization and drying effect.
◆ Flash vacuum drying technology, fabric dryness is less than 0.6%, instrument dryness is less than 0.1%
◆ Prints process data in real time via a built-in printer, and pharmaceutical customers are equipped with a paperless recorder.

◆ Pipeline system: stainless steel sanitary pipeline, clamp connection, welding seam all adopt automatic pipe welder welding;The main control valves are imported German Angle seat valve and solenoid valve, German NASH direct water ring vacuum pump.
◆ Supply system detection and alarm system: equipped with steam, water, power phase sequence detection and alarm device, once the supply system does not meet the operating conditions of equipment, automatic alarm, and forbid the program to start and terminate the program operation.
◆ According to the principle, the inner chamber jacketed double inlet, allowing pure steam into the inner chamber and industrial steam into the jacket

◆ With automatic drainage temperature adjustment system, drainage temperature <60℃.

Technical parameters

Chamber design pressure	-0.1/0.3MPa	Accuracy of temperature	0.1℃
Jacket design pressure	0.3MPa	Accuracy of pressure	0.1KPa
Generator design pressure	1.0 MPa	Sterilization temperature control accuracy	±1℃
Design tempreture	150℃	Temperature uniformity	±1℃
Maximum operating temperature	139℃	Negative pressure pulsevacuum	-80 ~0KPa
Maximum operating pressure	0.25MPa	Across the pressure pulsation	-80~80KPa
Chamber relief valve	0.28MPa	Positive pressure pulse	0 ~ 9 times
Jacket relief valve	0.28 MPa	Maximum vacuum	-96 KPa

Pure steam pulsevacuum sterilizer

MODE	Chamber size	volume	Overall dimensions	weight	Steam consumption	Water consumptionKg/C	POWER
MODE	Chamber size	（m3)	Overall dimensions	Kg	Kg/C	Water consumptionKg/C	POWER
	W×H×D		L×W×H
CST-0.25	550×550×850	0.25	1250×1350×1800	750	16	100	380V,50HZ 2KW
CST-0.3	550×550×1000	0.3	1360×1350×1800	800	18	120	380V,50HZ 2KW
CST-0.45	652×690×1000	0.45	1360×1400×2000	850	22	180	380V,50HZ 2KW
CST-0.6	610×910×1200	0.6	1500×1350×1900	1200	35	320	380V,50HZ 3KW
CST-0.8	610×910×1500	0.8	1800×1350×1900	1350	47	400	380V,50HZ 3.5KW
CST-1.0	610×910×1800	1	2100×1350×1900	1550	55	500	380V,50HZ 3.5KW
CST-1.2	680×1180×1500	1.2	1800×1420×2000	1650	65	600	380V,50HZ 3.5KW
CST-1.5	680×1180×1850	1.5	2100×1420×2000	1850	80	750	380V,50HZ 4KW
CST-2.0	900×1380×1620	2	1970×1750×2200	2300	106	1000	380V,50HZ 4.5Kw
CST-2.5	900×1380×2050	2.5	2350×1750×2200	2700	132	1250	380V,50HZ 6Kw
CST-3.0	900×1380×2420	3.0	2750×1750×2200	3500	160	1500	380V,50HZ 8Kw
CST-4.0	900×1380×3250	4	3550×1850×2200	4500	190	1750	380V,50HZ 8Kw
CST-5.0	900×1380×4040	5	4350×1850×2200	5500	220	2000	380V,50HZ 12Kw
CST-6.0	900×1380×4850	6	5150×1850×2200	6500	250	2250	380V,50HZ 14Kw

CST series pure steam pulsevacuum sterilizer

Product Introduction:

Related Information