Correct use steps of sterilizer

Usage of sterilizer:

1. Remove the outer packaging.

2. Place the sterilizer correctly. For better sterilization, the sterilizer should be placed on a solid horizontal surface.

3. Add 3.5L water to the sterilizer and add an appropriate amount of water after each use to avoid burning the electric heating pipe due to lack of water.

4. Put the prepared articles to be sterilized into the sterilizer equipment, and leave a gap between the bags to ensure air penetration. Cover the well cover and tighten the screws.

5. Check the type of power supply and ensure that the sterilizer matches the specification to be used, and then plug one end into the plug of the sterilizer and the other end into the power socket.

6. Observe the pressure indication or temperature indication of the pressure gauge. When the steam pressure rises to about 0.165mpa, the safety valve works automatically. When the pressure drops to about 0.142mpa, the safety valve closes automatically to keep the pressure constant.

7. After sterilization, first unplug the plug and stop heating, then open the steam exhaust port to release steam, and then open the cover to discharge the remaining steam after the pointer of the pressure gauge is reset to zero.